Back-up Rings
Back-up rings are the most common anti-extrusion devices employed in dynamic and static sealing, designed to prevent the migration of sealing material into the extrusion gap under the system pressure. Parker offers a wide range of back-up ring geometries and materials to suit every seal type and application. They are open or closed shapes for snap assembly made of a broad range of compounds which are highly resistant to thermal or mechanical stress. Parker back-up rings help reduce costly downtime and ensure long-term functional reliability.
| Brands |
|---|
Related products
- Seals
WIPER SEALS
0 out of 5(0)Rod wipers for alternative linear movements have been designed to give first-class protection to seals and driving bodies in hydraulic and pneumatic cylinder applications.
The main function of the rod wiper is to keep the rod clean from any possible impurity.
The •FP• rod wipers have a chamfer on the outside diameter to facilitate the press fitting into the housing. To simplify the installation, the bore should have a chamfer as per DIN 3760.
SKU: n/a - Seals
PISTON SEALS
0 out of 5(0)The PDE is a symmetric double-acting piston seal for alternative linear movements. Is it designed for oleodynamic applications made in NBR rubber with a hardness of 85 Shore A. It is fitted with expansion garter springs to ensure the correct pressure on the radial contact.
SKU: n/a - Seals
Buffer Seals
0 out of 5(0)Buffer seals are primary seals in tandem sealing configurations. Designed to withstand pressure peaks from the system, Parker hydraulic buffer seals employ an unsymmetrical cross-section design and are often combined with anti-extrusion rings to prevent gap extrusion. State-of-the-art designs include a pressure-relief functionality from the low pressure side, addressing concerns related to drag-oil pressure trapped between the tandem elements. Our comprehensive selection of premium buffer seals are designed for use with hydraulic cylinders, providing excellent wear resistance, and high pressure capabilities. Parker buffer seals combine advanced polymer materials, such as PTFE or TPU with sophisticated product design.
SKU: n/a - Seals
Flange Seals
0 out of 5(0)Flange seals provide the front-face static sealing function within flange connections. There are two major design principles available, either for internal or external pressure. Various designs in a broad range of compounds provide individual features. Parker’s flange seals offer enhanced sealing performance from pressure-free to high-pressure conditions. Designs can be optimized to be insensitive to pressure peaks, show high extrusion resistance or media resistance.
SKU: n/a - Seals
V-RINGS
0 out of 5(0)Endless all-rubber face seal produced up to 2.100 mm in one single piece and joint-vulcanized for larger diameters. It works as a front seal and it is the perfect solution to prevent contamination from dirt, dust, or water. It can be used as a secondary seal to protect the primary seals.
The V-Ring is a seal of easy use and assembly since it is self-retaining on the shaft and does not need a special finishing grade and tolerance. The contact area can have a roughness from Ra 0.5 to Ra 1.6 according to the speed and the fluids to be sealed.
SKU: n/a





















