No products in the cart.
Pressure Transmitter 
EJXC40A Digital Remote Sensor (DRS) Differential Pressure System
The EJXC40A Digital Remote Sensor (DRS) transmitter connects two pressure sensors, the master sensor (for high-pressure side) and remote sensor (for low-pressure side) with DRS dedicated communication cable to measure differential pressure. The DP is transmitted via a 4 to 20 mA analog signal.
EJXC40A DRS features include:
- ±0.056% System Accuracy*
- ±0.1% per 10 years Stability
- 250 ms Response Time
| Brands |
|---|
Related products
- Pressure Transmitter
Smart differential pressure transmitter APR-2000 ALW
- 4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
- Display with backlight
- SIL 2 certificate
- Intrinsic safety certificate (ATEX, IECEx)
- Explosion proof certificate (ATEX, IECEx)
- PED Conformity (97/23/EC)
- Programmable zero range, shift, characteristic and damping ratio with local panel keys
- Static pressure limit up to 420bar
- Accuracy 0,075% (0,05% on request)
- Marine certificate – DNV, BV
- Gold plated diaphragms
- Wetted parts material Hastelloy C276
SKU: n/a - Pressure Transmitter
Electronic differential pressure Deltabar FMD71
Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter
The electronic dp Deltabar FMD71 is a differential pressure system, used to measure the pressure or level, volume or mass of liquids in pressurized tanks or distillation columns/evaporators. The high pressure sensor (HP) measures the hydrostatic pressure. The low pressure sensor (LP) measures the head pressure. The level is calculated in the transmitter using these two digital values. The electronic dp system eliminates issues of traditional differential pressure measurements.
SKU: n/a - Pressure Transmitter
SITRANS P310
The SITRANS P310 is a digital pressure transmitter with integrated HART diagnostic functions and a high operating comfort. Representing a basic device for easy measurements with low accuracy requirements the P310 complements the already existing P DS III. The different design variants for measuring gauge and differential pressure are available.
SKU: n/a - Pressure Transmitter
Smart pressure transmitter APC-2000ALW
- 4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
- Display with backlight
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- SIL 2 certificate
- Intrinsic safety certificate (ATEX, IECEx)
- Explosion proof certificate (ATEX, IECEx)
- Marine certificate – DNV, BV
- PED Conformity (97/23/EC)
- Accuracy 0,075% (0,05% on request)
- Gold plated diaphragm (Au)
- MID (Measuring Instruments Directive) – certificate acc. to 2004/22/WE directive and OIML R140:2007 recommendations.
SKU: n/a - Pressure Transmitter
Absolute and gauge pressure Cerabar PMC21
Cost-effective pressure transducer with ceramic sensor for measurement in gases or liquids
The Cerabar PMC21 is a very compact pressure transmitter. It features a capacitive, oil-free ceramic sensor and is able to measure absolute or gauge pressure from 100mbar up to 40bar. It is designed to withstand the harsh conditions in the process industry with ingress protection grades up to IP68 and highly abrasion resistant Ceraphire membrane as well as high quality 316L housing. It can be used in most areas as it offers various certifications like hazardous area or marine certificates.
SKU: n/a
