No products in the cart.
Product Carousel Tabs
Seals
HIGH PRESSURE OIL SEALS
The rotary shaft oil seal is an indispensable component in lubricated rotating equipment and must be chosen with caution in order to ensure that the correct design and materials are used to provide a long-lasting life for the rotating equipment.
These variations of the G and M type seals are engineered to withstand pressure up to 10 BAR (1 MPa), although this limit has been exceeded in some applications. These seals are available with or without an additional dust lip. The G type and its high pressure variants show a metal insert covered by rubber, while the M type and its variants offer a bare metal body on the outside diameter.
SKU: n/a
Seals
OIL FILM BEARINGS
Primary shaft oil seals for oil film bearings. The BBS® oil seals are available in both DF and MX style to fit every customers’ requirement.
Used in steel mill: back-up rolls (hot and cold rolling mills). The BBS® oil seals can be supplied together with the corresponding Water Seal, or with specific V-Rings (secondary seal).
SKU: n/a
Seals
ROTARY SHAFT OIL SEAL
The rotary shaft oil seal is an indispensable component in any lubricated rotating equipment.
The •FP• oil seals provide the right solution to every sealing problem.
•FP• rotary shaft oil seals are produced according to modern engineering techniques with high-performing materials, as requested by industry specifications.
SKU: n/a
Seals
V-RINGS
Endless all-rubber face seal produced up to 2.100 mm in one single piece and joint-vulcanized for larger diameters. It works as a front seal and it is the perfect solution to prevent contamination from dirt, dust, or water. It can be used as a secondary seal to protect the primary seals.
The V-Ring is a seal of easy use and assembly since it is self-retaining on the shaft and does not need a special finishing grade and tolerance. The contact area can have a roughness from Ra 0.5 to Ra 1.6 according to the speed and the fluids to be sealed.
SKU: n/a
Seals
WIPER SEALS
Rod wipers for alternative linear movements have been designed to give first-class protection to seals and driving bodies in hydraulic and pneumatic cylinder applications.
The main function of the rod wiper is to keep the rod clean from any possible impurity.
The •FP• rod wipers have a chamfer on the outside diameter to facilitate the press fitting into the housing. To simplify the installation, the bore should have a chamfer as per DIN 3760.
SKU: n/a
Product Carousel Tabs
Spring và Shock Obsober
Stainless Steel Compression Spring
Stainless Steel Compression Spring
1:Wire diameters from 0.05 to 18mm
2:Outside diameters either constant, tapered, convex or concave
3:Springs can have loading characteristics that are either constant or variable
4:We are specialists in precision end grinding to ensure accurate seating in your spring application.
1:Wire diameters from 0.05 to 18mm
2:Outside diameters either constant, tapered, convex or concave
3:Springs can have loading characteristics that are either constant or variable
4:We are specialists in precision end grinding to ensure accurate seating in your spring application.
Brand: MingLi
Item NO.: MLC-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Custom color
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
Stainless Steel Extension Spring
Stainless Steel Extension Spring
Wire size from 0.05mm to 16mm
End types available are machine, swivel, crossover and extended hook designs
Winamac Coil Spring specializes in custom hook configurations fabricated to individual customer requirements
Brand: MingLi
Item NO.: MLE-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Custom color
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
Stainless Steel Torsion Spring
Stainless Steel Torsion Spring
Wire sizes from 0.05mm to 16mm
Wide variety of leg lengths, shapes, anchoring configurations and coil diameters.
In-house shot peening available to improve fatigue life of your spring.
Brand: MingLi
Item NO.: MLT-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Custom color
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
Stainless Steel Wire Forming Spring
Stainless Steel Wire Forming Spring
Wire Forms products are widely used in automobile, electrical, mechanical, optical, medical, daily chemical products, sports equipment and other induitrses，Enterprise sprise spirit, humanistic quality.
Brand: MingLi
Item NO.: MLF-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Custom color
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
TB Brown Standard Die Springs
TB Brown Standard Die Springs
Our company can produce OD from 6mm-60mm JIS and ISO die spring.
Company’s annual production capacity is about 10 million pcs.
We have warehouse over 1200 squire meters area.
Metrial: 65Mn and Alloy Steel.
Brand: MingLi
Item NO.: MLTB-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Brown
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
TF Yellow Standard Die Springs
TF Yellow Standard Die Springs
Our company can produce OD from 6mm-60mm JIS and ISO die spring.
Company’s annual production capacity is about 10 million pcs.
We have warehouse over 1200 squire meters area.
Metrial: 65Mn and Alloy Steel.
Brand: MingLi
Item NO.: MLTF-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Yellow
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
TH Green Standard Die Springs
TH Green Standard Die Springs
Our company can produce OD from 6mm-60mm JIS and ISO die spring.
Company’s annual production capacity is about 10 million pcs.
We have warehouse over 1200 squire meters area.
Metrial: 65Mn and Alloy Steel.
Brand: MingLi
Item NO.: MLTH-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Green
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
TL Blue Standard Die Springs
TL Blue Standard Die Springs
Our company can produce OD from 6mm-60mm JIS and ISO die spring.
Company’s annual production capacity is about 10 million pcs.
We have warehouse over 1200 squire meters area.
Metrial: 65Mn and Alloy Steel.
Brand: MingLi
Item NO.: MLTL-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Blue
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Spring và Shock Obsober
TM Red Medium Standard Die Springs
TM Red Medium Standard Die Springs
Our company can produce OD from 6mm-60mm JIS and ISO die spring.
Company’s annual production capacity is about 10 million pcs.
We have warehouse over 1200 squire meters area.
Metrial: 65Mn and Alloy Steel.
Brand: MingLi
Item NO.: MLTM-1
Payment: T/T,L/C
Product Origin: Ningbo China
Color: Red
Shipping Port: NingBo
Lead Time: 5-15 Days
SKU: n/a
Product Carousel Tabs
Positioners
Electropneumatic positioner APIS
HART protocol
ATEX certificate II 2G Exia IIC T6/T5 Gb
Simple in installation and programming
Possibility of remote assembling of positioner
Low air consumption
Programmable speed of movement of the actuator’s piston rod
Position transmitter
Possibility of manual controlling of position of actuator’s piston rod
SKU: n/a
Product Carousel Tabs
Drum Brakes
AIR DISC BRAKES HS-CODE 87169090
QP mouth, CQP mouth series pneumatic clamp disc brakes, are widely used in the small and medium-sized drive mechanism to stop or deceleration. Tension brake winding institutions, such as paper tension, tension control of the press printing newsprint, steel plate (steel wire) unwound tension wire and cable actinomycetes, put the cable tension control….
SKU: n/a
Drum Brakes
Electro Hydraulic Disc Brake YPZ2-560II/ Bed 121/6-L-K1K2
We are manufacturer to produce drum brake, disc brake, electro hydraulic thruster, which can be used for lifting, metallurgy, mining, ports, construction etc. All of our brakes and thrusters are apprroved by ISO9001, and we provide 18 month quality warranty….
SKU: n/a
Drum Brakes
Mill Duty Thruster Brake (Manufacturer Of Electro Hydraulic Thruster Brake)
Henan Zhongyuan Brake Co., Ltd is the leading manufacturer of Electro hydraulic Thruster Brake. Our mill duty Thruster Brakes are suitable for 400/440 Volts, 3 Phase A.C. supply for a wide range of drum sizes, from 100mm to 800 mm dia. Higher sizes can also be supplied against specific requirements. The brake is applied by the tension of the compressed springs mounted vertically between the thruster and brake lever. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted….
SKU: n/a
Drum Brakes
QP Series Disc Brake Caliper/ZYBC China Disc Brake Manufacturer
QP、CQP series Pneumatic Disc Brakes are widely used for speed reducing ,stopping/braking of the low or medium torque driving mechanism. The brakes can also be applied as tension brake on winding machines, such as: paper-web tension control, news paper publishing tension control,steel unwind control, wire and cable reel unwind tension etc….
SKU: n/a
Drum Brakes
YP3 Series Crane Disc Brake
YP Series Electro-hydraulic Disc Brakes are advanced products with high performance and multiple functions. They are maintenance-friendly due to advanced functions applied on them such as automatic shoe clearance balancing and wear-self-compensation device. Various limit switches can provide interlocking protection signal to main machinery PLC. They fit very well for decelerating and stop/braking large-scale modern machines such as loading and unloading machinery, lifting and transporting machinery, metallurgy equipment and mining equipment….
SKU: n/a
Product Carousel Tabs
Motor
AC Motor DRK
The DRK.. motor in the modular DR.. series motor system is a single-phase motor that can be operated on a single-phase power supply (instead of the usual three-phase power supply). The DRK.. motor comes equipped with running capacitor CB.
DRK.. series motors can be operated on the following single-phase power grids:
– 220 V/ 50 Hz, 230 V / 50 Hz, 220 V / 60 Hz or 230 V / 60 Hz
The running capacitor integrated in the terminal box allows for operation under many demanding ambient conditions. SEW-EURODRIVE also offers ET56 and ER63 motors.
SKU: n/a
Motor
AC Motor DT/DV Series
DT / DV series AC motors and AC brake motors are the ideal match for SEW-EURODRIVE vertical gear units. Our wide range of variants ensures that we have the right motor for your application, whether 2-, 4-, 6- or 8-pole or multi-speed. SEW-EURODRIVE brake motors have integrated DC safety disc brakes. The brake control is installed in the terminal box as standard, but is also available in control cabinet version as an option. The patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.
SKU: n/a
Motor
Aseptic Drives DAS Series
Solutions for use in dry hygiene areas:
DAS series aseptic gearmotors for drive solutions with smooth surfaces and without fans:
Motors in degree of protection IP66 (brakemotors IP65)
Motor corrosion protection: KS internal coating
Surface protection OS1 to OS4
Motor protection thermistor in thermal class F, TH optional (thermocontact)
IS plug connector
SKU: n/a
Product Carousel Tabs
Cable Chain
STEEL CABLE CHAIN
SHINSUNG drag chains are used where energy has to be supplied to mobile machine parts or apparatus.
The chain joint lock in the opposite direction.
In SHINSUNG drag chains, cables and hoses conveying varying substances can be carried alongside one another at the same time.
SKU: n/a
Product Carousel Tabs
Gear Reducer
Motovario helical gear reducers
Designed to offer maximum reliability even in the harshest operating conditions, the Motovario helical gear reducers – H series guarantees complete versatility and is suitable for applications that require high radial loads.
The H-series includes a large number of extremely versatile models, in cast iron (sizes 030 to 140).
Certifications Available: ATEX 2GD/3GD
Warranty: Two years from date of delivery.
SKU: n/a
Gear Reducer
Motovario shaft mounted gear reducers
Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.
The S series Motovario shaft mounted gear reducers, available in cast iron from size 050 to 125, offer a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.
The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.
Certifications Available (up to size 125): ATEX 2GD/3GD
SKU: n/a
Gear Reducer
Motovario worm gear reducers
NMRV and NMRV POWER Motovario worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility.
The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
SKU: n/a
