No products in the cart.
Product Carousel Tabs
Amerigear Mill Spindles
Amerigear® SL and SF Mill Spindles
SL Series (Leveler type) and SF Series (Flange type) spindles are designed for medium torque mill applications and auxiliary equipment where high misalignment capacity is required and where equipment must be disconnected quickly and/or frequently. Some of the advanced design technology incorporated into more expensive type spindles are made available in these series. Typical applications include drives for auxiliary equipment such as levelers, uncoilers, side trimmers, tension, runout tables, pinch rolls, brush rolls, bridles, flatteners, and scale breakers. SL Spindles can also be used on applications where shaft center-to-center spacing is minimal and where diameters are limited.
SKU: n/a
Amerigear Mill Spindles
Amerigear® SM Mill Spindles
SM Series spindles are custom-designed and used primarily on rolling mill drives ranging from heavy duty, hot reversing roughers to high speed cold mills. The spindles used on these drives are often limited by the minimum roll size,and they must handle high continuous loads. These spindles must also accommodate high misalignment angles due to the constant change in material thickness, roll size, and roll change requirements.
Advanced Gear Design enables Ameridrives to optimize mill spindles for the specific operating conditions. The high angle, largely loaded steel mills benefit with less maintenance, lower cost, increased productivity and minimal failures.
SKU: n/a
Product Carousel Tabs
Amerigear Mill Spindles
Amerigear® SL and SF Mill Spindles
SL Series (Leveler type) and SF Series (Flange type) spindles are designed for medium torque mill applications and auxiliary equipment where high misalignment capacity is required and where equipment must be disconnected quickly and/or frequently. Some of the advanced design technology incorporated into more expensive type spindles are made available in these series. Typical applications include drives for auxiliary equipment such as levelers, uncoilers, side trimmers, tension, runout tables, pinch rolls, brush rolls, bridles, flatteners, and scale breakers. SL Spindles can also be used on applications where shaft center-to-center spacing is minimal and where diameters are limited.
SKU: n/a
Amerigear Mill Spindles
Amerigear® SM Mill Spindles
SM Series spindles are custom-designed and used primarily on rolling mill drives ranging from heavy duty, hot reversing roughers to high speed cold mills. The spindles used on these drives are often limited by the minimum roll size,and they must handle high continuous loads. These spindles must also accommodate high misalignment angles due to the constant change in material thickness, roll size, and roll change requirements.
Advanced Gear Design enables Ameridrives to optimize mill spindles for the specific operating conditions. The high angle, largely loaded steel mills benefit with less maintenance, lower cost, increased productivity and minimal failures.
SKU: n/a
Product Carousel Tabs
Gear Reducer
Motovario helical gear reducers
Designed to offer maximum reliability even in the harshest operating conditions, the Motovario helical gear reducers – H series guarantees complete versatility and is suitable for applications that require high radial loads.
The H-series includes a large number of extremely versatile models, in cast iron (sizes 030 to 140).
Certifications Available: ATEX 2GD/3GD
Warranty: Two years from date of delivery.
SKU: n/a
Gear Reducer
Motovario shaft mounted gear reducers
Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.
The S series Motovario shaft mounted gear reducers, available in cast iron from size 050 to 125, offer a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.
The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.
Certifications Available (up to size 125): ATEX 2GD/3GD
SKU: n/a
Gear Reducer
Motovario worm gear reducers
NMRV and NMRV POWER Motovario worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility.
The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
SKU: n/a
Product Carousel Tabs
Mechanical Power Transmission Coupling
Geared Coupling
Flexocon Geared Couplings is used to join two rotating shafts for efficient transmission of Mechanical Power. Flexocon full gear Flexible Gear Coupling consists of two identical toothed hubs, two identical flanged sleeves with internal teeth, a gasket, a set of bolts, nuts and spring washers, lube plugs and two oil/grease retaining O-ring over the hubs…
SKU: n/a
Mechanical Power Transmission Coupling
Pin Bush & Tyre Coupling
Flexocon Pin bush type flexible Couplings are of the cushioned drive type, transmitting the torque, through high Tensile bolts to the machine input shafts. Special Rubber Compounds are used in bushes so that it can absorb slight misalignments, tensional vibration and shock loads. The flanges are made of high grade cast iron. For special applications cast steel flanges are also manufactured.
Flexocon offer 20 standard models of Pin bush coupling with rating range from 0.81 KW to 249 KW at 100 rpm.
Flexocon also manufacture Pin bush type Brake Dum cum flexible couplings of different diameter to suit standard as well as non standard brakes.
Features
Features
No lubrication required. Accommodates misalignments. Damps out vibration. Reversing resiliency against shocks. Easy installation and removal. Inexpensive.
SKU: n/a
Product Carousel Tabs
Motor
AC Motor DRK
The DRK.. motor in the modular DR.. series motor system is a single-phase motor that can be operated on a single-phase power supply (instead of the usual three-phase power supply). The DRK.. motor comes equipped with running capacitor CB.
DRK.. series motors can be operated on the following single-phase power grids:
– 220 V/ 50 Hz, 230 V / 50 Hz, 220 V / 60 Hz or 230 V / 60 Hz
The running capacitor integrated in the terminal box allows for operation under many demanding ambient conditions. SEW-EURODRIVE also offers ET56 and ER63 motors.
SKU: n/a
Motor
AC Motor DT/DV Series
DT / DV series AC motors and AC brake motors are the ideal match for SEW-EURODRIVE vertical gear units. Our wide range of variants ensures that we have the right motor for your application, whether 2-, 4-, 6- or 8-pole or multi-speed. SEW-EURODRIVE brake motors have integrated DC safety disc brakes. The brake control is installed in the terminal box as standard, but is also available in control cabinet version as an option. The patented two-coil brake system facilitates high starting frequency and positioning accuracy with particularly short response and reaction times.
SKU: n/a
Motor
Aseptic Drives DAS Series
Solutions for use in dry hygiene areas:
DAS series aseptic gearmotors for drive solutions with smooth surfaces and without fans:
Motors in degree of protection IP66 (brakemotors IP65)
Motor corrosion protection: KS internal coating
Surface protection OS1 to OS4
Motor protection thermistor in thermal class F, TH optional (thermocontact)
IS plug connector
SKU: n/a
Product Carousel Tabs
Product Carousel Tabs
Pumps
Diaphragm Pumps
Parker miniature diaphragm pump solutions provides the highest flow per watt available on the market today. Suitable for a broad range of diaphragm pump applications, our miniature pumps promise significant cost savings and reduced field service time thanks to a unique design and advanced motor technology. We also offer a full line of miniature liquid diaphragm pumps that harness the higher fluidic resistance of liquids to deliver higher levels of performance across a wide range of applications.
SKU: n/a
Pumps
Gear Pumps
Parker’s full line of high and low speed pumps provide power ranging up to 15,000 inch-pounds of torque with speeds ranging from 1/2 rpm to 13,000 rpm. A complete range of sizes is offered in gear, gerotor, vane and piston style operating configurations. Fixed and variable displacement motors are available. Parker hydraulic motors deliver excellent performance with high efficiency, true wear compensation and longer service life.
SKU: n/a
