No products in the cart.
Product Carousel Tabs
Diaphragm Couplings
Ameriflex® Diaphragm Couplings
Since its introduction in 1971, the Ameriflex multiple convoluted diaphragm coupling has continued to set new standards for life and reliability in high performance machinery applications. Today, by using the latest design and manufacturing technology, Ameridrives Couplings is able to offer increased diaphragm coupling performance without compromising this outstanding reliability.
Advanced analysis and manufacturing processes have produced increased ratings without reducing safety factors. The use of the latest finite element analysis methods verified by strain gage and dynamic testing has allowed for a more precise calculation of the Ameriflex diaphragm stresses
SKU: n/a
Product Carousel Tabs
Universal Joints
Americardan 2000 Series U Joints
The Ameridrives Universal Joint is available in seven basic bearing designs:
Sizes U2131-U2155: Needle bearing design. Bearing caps are retained by snap rings.
Sizes U2160-U2188: Needle bearing design. Bearing caps are retained by bolts.
Sizes U2192: Uses two rows of roller bearings. Bearing caps are retained by snap rings. Lube fitting in center of cross.
SKU: n/a
Universal Joints
Americardan 5000 and 3000 Series U-Joints
Designed for operation at high misalignment angles up to 15º. Bearing and seal design resists lubrication loss and contamination. Ideal for use in severe atmospheric conditions. Superior materials and tight tolerances have proven to reduce vibration levels in rolling mills.
5000 Series are high torque designs ideal for applications with diameter restrictions such as cold mills. Catalog sizes range from 225 mm to 860 mm swing diameters and peak torque capacities up to 5647 kNm. Higher torque, custom designs are available in excess of 1200 mm swing diameter.
3000 Series are rated for high misalignment angles and are available in catalog sizes from 55 mm to 860 mm swing diameters and peak torque capacities up to 3153 kNm. Higher torque, custom designs are available in excess of 1000 mm swing diameter. Sizes 3440 and larger incorporate a unique inner race design within the bearing package to reduce routine repair costs by approximately 50%.
SKU: n/a
Universal Joints
Americardan J Series Universal Joints
Model J Series U-joints use only high-wing bearing cap design. Developed for operation misalignment at high angles up to 15º. Bearing and seal design resists lubrication loss and contamination. Ideal for use in severe atmospheric conditions.
SKU: n/a
Product Carousel Tabs
Product Carousel Tabs
Seals
HIGH PRESSURE OIL SEALS
The rotary shaft oil seal is an indispensable component in lubricated rotating equipment and must be chosen with caution in order to ensure that the correct design and materials are used to provide a long-lasting life for the rotating equipment.
These variations of the G and M type seals are engineered to withstand pressure up to 10 BAR (1 MPa), although this limit has been exceeded in some applications. These seals are available with or without an additional dust lip. The G type and its high pressure variants show a metal insert covered by rubber, while the M type and its variants offer a bare metal body on the outside diameter.
SKU: n/a
Seals
OIL FILM BEARINGS
Primary shaft oil seals for oil film bearings. The BBS® oil seals are available in both DF and MX style to fit every customers’ requirement.
Used in steel mill: back-up rolls (hot and cold rolling mills). The BBS® oil seals can be supplied together with the corresponding Water Seal, or with specific V-Rings (secondary seal).
SKU: n/a
Seals
ROTARY SHAFT OIL SEAL
The rotary shaft oil seal is an indispensable component in any lubricated rotating equipment.
The •FP• oil seals provide the right solution to every sealing problem.
•FP• rotary shaft oil seals are produced according to modern engineering techniques with high-performing materials, as requested by industry specifications.
SKU: n/a
Seals
V-RINGS
Endless all-rubber face seal produced up to 2.100 mm in one single piece and joint-vulcanized for larger diameters. It works as a front seal and it is the perfect solution to prevent contamination from dirt, dust, or water. It can be used as a secondary seal to protect the primary seals.
The V-Ring is a seal of easy use and assembly since it is self-retaining on the shaft and does not need a special finishing grade and tolerance. The contact area can have a roughness from Ra 0.5 to Ra 1.6 according to the speed and the fluids to be sealed.
SKU: n/a
Seals
WIPER SEALS
Rod wipers for alternative linear movements have been designed to give first-class protection to seals and driving bodies in hydraulic and pneumatic cylinder applications.
The main function of the rod wiper is to keep the rod clean from any possible impurity.
The •FP• rod wipers have a chamfer on the outside diameter to facilitate the press fitting into the housing. To simplify the installation, the bore should have a chamfer as per DIN 3760.
SKU: n/a
Product Carousel Tabs
Pressure Transmitter
Absolute and gauge pressure Cerabar PMC21
Cost-effective pressure transducer with ceramic sensor for measurement in gases or liquids
The Cerabar PMC21 is a very compact pressure transmitter. It features a capacitive, oil-free ceramic sensor and is able to measure absolute or gauge pressure from 100mbar up to 40bar. It is designed to withstand the harsh conditions in the process industry with ingress protection grades up to IP68 and highly abrasion resistant Ceraphire membrane as well as high quality 316L housing. It can be used in most areas as it offers various certifications like hazardous area or marine certificates.
SKU: n/a
Pressure Transmitter
Absolute and gauge pressure Cerabar PMC51
Digital pressure transmitter with oil-free ceramic sensor for measurement in gases or liquids
The Cerabar PMC51 digital pressure transmitter with capacitive, oil-free ceramic measuring cell is typically used in process and hygienic applications for pressure, level, volume or mass measurement in liquids and gases. It guarantees high degree of system safety thanks to vacuum-proof ceramic membrane with integrated breakage detection. Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. SIL2 according to IEC 61508 / IEC 61511.
SKU: n/a
Pressure Transmitter
Absolute and gauge pressure Cerabar PMC71
Digital pressure transmitter with oil-free ceramic sensor for measurement in gases or liquids
The Cerabar PMC71 digital pressure transmitter with capacitive, oil-free ceramic measuring cell is typically used in the process and hygienic applications for pressure, level, volume or mass measurement in liquids and gases. It guarantees high degree of system safety thanks to vacuum-proof ceramic membrane with integrated breakage detection. Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. SIL2/3 according to IEC 61508.
SKU: n/a
Pressure Transmitter
Absolute and gauge pressure Cerabar PMP21
Cost-effective pressure transducer with metal sensor for measurement in gases or liquids
The Cerabar PMP21 is a price-attractive and very compact pressure transmitter. It features a piezo-resistive sensor and is able to measure absolute or gauge pressure from 400mbar up to 400bar. The PMP21 is designed to withstand the harsh conditions in the process industry with ingress protection grades up to IP 68 and high quality materials like 316L. It can be used in most areas as it offers various certifications like hazardous area or marine certificates.
SKU: n/a
Pressure Transmitter
Absolute and gauge pressure Cerabar PMP23
Cost-effective pressure transducer with fully welded design for the food & beverage industry
The Cerabar PMP23 is a price-attractive and compact absolute or gauge pressure transmitter. The piezo-resistive measuring cell with flush-mounted 316L diaphragm was designed for applications in the hygienic industry. PMP23 offers various EHEDG and 3-A certified hygienic process connections, materials with FDA conformity, EG1935/2004 conformity, IP69 protection, optional IO-Link and hazardous area certificates. The device can be delivered with customized measuring ranges up to 40bar.
SKU: n/a
Pressure Transmitter
APT3100
| Type | Pressure: Differential(DPIT), Gauge/ Absolute(PIT), Level(LIT), High Static Pressure, Flow Pressure(FIT) | |
| Certificate | SIL2 (TUV, FMEDA), Ex d, Ex ia, FM, ATEX, TR CU(EAC), INMETRO, CE, Rohs, BV, LR, KR, DNV, ABS, KCs, IP66/67, NEMA 4X | |
| Feature | 4 to 20mA, HART, Loop PoweredAccuracy ± 0.075% (option ± 0.04%) of CS* 3 lines LCD display, Self Diagnostic Function, External Buttons, DAC, Zero Trim, Eng mode
| |
| Application | Pressure, Flow, Level measurement for Oil & Gas, Liquid, Water, Maine & offshore, Vessel, Power, Chemical Plants and Refinary |
SKU: n/a
Pressure Transmitter
APT3200
| Type | Gauge/ Absolute(PIT), Level (LIT), High Static pressure | |
| Certificate | SIL2 (TUV, FMEDA), Ex d, Ex ia, FM, ATEX, TR CU(EAC), INMETRO, CE, Rohs, BV, LR, KR, DNV, ABS, KCs, IP66/67, NEMA 4X | |
| Feature | 4 to 20mA, HART, Loop PoweredAccuracy ± 0.075% (option ± 0.04%) of CS* 3 lines LCD display, Self Diagnostic Function, External Buttons, DAC, Zero Trim, Eng mode
| |
| Application | Pressure, Level measurement for Oil & Gas(up & down stream), Liquid, Water, Maine & offshore, Vessel, Power, Chemical Plants and Refinary |
SKU: n/a
Pressure Transmitter
APT3500
| Type | Pressure: Differential(DPIT), Gauge/ Absolute(PIT), Level(LIT), High Static Pressure, Flow Pressure(FIT) | |
| Certificate | SIL2 (TUV, FMEDA), Ex d, Ex ia, FM, ATEX, TR CU(EAC), INMETRO, CE, Rohs, BV, LR, KR, DNV, ABS, KCs, IP66/67, NEMA 4X | |
| Feature | 4 to 20mA, HART, Loop PoweredAccuracy ± 0.04% of CS* 3 lines LCD display, Self Diagnostic Function, External Buttons, DAC, Zero Trim, Eng mode, Gold Plate
| |
| Application | Advanced performance. Pressure, Flow, Level measurement for Oil & Gas, Liquid, Water, Marine & offshore, Vessel, Power, Chemical Plants and Refinary |
SKU: n/a
Pressure Transmitter
Capacitance Manometers
Advanced manometer technology delivers sustained vacuum accuracy.
Every vacuum pressure gauge and chamber process has a precise Torr level it must reach to sustain process yields. With industry-leading advanced sensor design features, capacitance manometers from Brooks Instrument are designed to improve manometer measurement reliability, minimize drift, resist diaphragm contamination and minimize thermal effects. And because these vacuum pressure gauges are fully digital devices, Brooks capacitance manometers operate over a wide dynamic range with extremely good accuracy. The result is an exceptionally reliable family of manometers and vacuum pressure gauges for all vacuum measurement applications.
SKU: n/a
Pressure Transmitter
Differential pressure Deltabar PMD55
Differential pressure transmitter with metal sensor for measurement of pressure differences
The Deltabar PMD55 differential pressure transmitter with piezoresistive sensor and welded metallic membrane is typically used in process or environmental applications for continuous measurement of pressure differences in liquids, vapors and gases. Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. SIL2 according to IEC 61508 / IEC 61511.
SKU: n/a
Pressure Transmitter
Differential pressure Deltabar PMD75
Differential pressure transmitter with metal sensor for measurement of pressure differences
The Deltabar PMD75 differential pressure transmitter with with piezoresistive sensor and welded metallic membrane is used in all industries for continuous measurement in liquids, vapors and gases. The 3-key operation enables simple and reliable commissioning and operation. The integrated HistoROM data module allows easy management of process and device parameters. Designed according to IEC 61508 for use in SIL2/3 safety applications.
SKU: n/a
Pressure Transmitter
EJA110E Differential Pressure Transmitter
The EJA110E is a high-performance differential pressure transmitter used to measure liquid, gas, or steam pressure. Featuring Yokogawa DPharp sensor technology, the EJA110E delivers measurements accurately, quickly, and reliably.
EJA-E series models in their standard configuration, with the exception of the Fieldbus, PROFIBUS and Low Power types, are certified as complying with SIL 2 safety requirements.
Accuracy: ±0.055% of Span
Stability: ±0.1% of URL per 10 years
Response Time: 90 msec
SKU: n/a
Pressure Transmitter
EJA118E DP Transmitter with Remote Diaphragm Seals
The EJA110E is a high-performance differential pressure transmitter used to measure liquid, gas, or steam pressure. Featuring Yokogawa DPharp sensor technology, the EJA110E delivers measurements accurately, quickly, and reliably.
EJA-E series models in their standard configuration, with the exception of the Fieldbus, PROFIBUS and Low Power types, are certified as complying with SIL 2 safety requirements.
Accuracy: ±0.055% of Span
Stability: ±0.1% of URL per 10 years
Response Time: 90 msec
SKU: n/a
